Plant Transport Cart

 

Model No.	Exterior Dimension	Post Thickness	Loading Capacity	Loaded in 1x40'HQ
	LxWxH(mm)	LxWxH(mm)
HM-DT001-S	715x562x1900	1.8 mm	40-50kg/shelf	700sets
HM-DT001	1350x565x1900	1.8 mm	80-100kg/ shelf	437 sets
HM-DT-WM002	72''x31''x68''	2.5 mm	100kg/ shelf	175 sets
Material	Mild steel Q235
Color	Galvanized or customization
Wheels	Four-wheel for PP, Nylon, Rubber, PU wheel
Containers come standard	- 1 x under carriage - 4 x posts of 1.8 mm sendzimir steel - 2-4 plywood - 4 wheels - Additional shelves can be purchased if required.
Finish	zinc/hot dip galvanized/powder coating

 

The Plant Transport Cart has 4 wheels that are easy to move, two fixed pulleys, and two universal wheels, which can be easily moved when fully loaded. Casters can be divided into PU casters, TPR casters, PP casters, PA casters, PE casters, etc. according to the material. Different materials determine the different characteristics of casters and are also suitable for different occasions.

 

PA wheel is a nylon wheel, which refers to a plastic made of polyamide resin. It has high mechanical properties, good toughness, high tensile and compressive strength; strong absorption capacity for impact and stress vibration, and the impact strength is higher than that of ordinary plastics; smooth surface, small friction coefficient, wear-resistant, but high price, Generally out of budget, it is not recommended to use it as wheels for plant transport cart.

 

PU casters are commonly known as superior rubber, and spring rubber, PU is an elastomer between plastic and rubber, and its excellent comprehensive performance is not available in ordinary plastic and rubber. Its elastomer has good properties such as wear resistance, chemical resistance, low-pressure resistance, tear resistance, radiation resistance, high load bearing, and shock absorption. This wheel is recommended for plant transport cart.

 

PP casters are made of plastic, chemical name polypropylene, with the best heat resistance and high bending fatigue life. PP casters are wear-resistant, corrosion-resistant and environmentally friendly. The most important thing is that the price is relatively cheap. Use it if you have a limited budget.

 

 

If your nursery moves plants daily, you need gear that keeps up.
Watch this video—zoom in on the solid upright posts, the reinforced base structure, and fittings. You’ll see one person assemble the entire plant transport cart in minutes, with no special tools needed.

 

 

 

 

 

 

HM group is always committed to maintaining strict production quality control, we have modular area management.

After finishing, we will carry out the finished product test, and inspection. If you need For on-site inspection, you can send a third-party inspection agency to inspect the goods, or we live broadcast the inspection.

When you receive the goods, if you have any questions, please contact us.

 

 

 

Everyone in the quality team has a wealth of work experience and is responsible for ensuring that the quality of the product is qualified.

 

The Danish containers' column and the chassis are bundled with plastic or forehead straps and are separated by wooden accessories to prevent collision. Ensure safe arrival at the place of receipt. Certainly, you can also customize the way of packaging.

HM Group maintains strict quality standards, supported by certifications from ISO, SGS, BV, and APT, along with patented technologies. 

 

 

Our clients purchase our products not only for quality, but the service is also especially important. after you receive products, if you find any defects or non-conformity, just send an email or message to us, we will respond to you within 24 hours, we will check with suppliers and QC team to identify the issue, within 3 days, we will work out the solution, like repairing, remaking or returning, and we will afford all fees.

Q: What is the material being used for your products?

A: Mild steel Q235

 

Q: I don't have a drawing or picture available for the custom products, could you design it for me?

A: Yes, we can make the best suitable design for you but do need to know the details, such as a) dimension b) loading capacity c)operation environment.

 

Q: What is the material of the wheels

A: We have 3 kinds of wheels, PP, PU, and nylon available, PU and nylon is expensive than PP.

 

Q: The shelf can be in the middle?

A: Yes, it can be in the middle. It is removable. Also, 2 or 3 shelves are available for your preferences.