Supermarket Logistic Container
A two-sided supermarket logistics container keeps store-bound goods in one handling unit from the distribution centre to the supermarket floor. Staff can load sorted merchandise at the warehouse, move the unit through dispatch, and replenish shelves from either open side at the store.
Model No.: HM-RC007
Tube Diameter: Φ20x2mm
Wire Diameter: Φ8&Φ 6 mm
Loading Capacity: 300 kg
Loaded in 1x40'HQ: 450 sets
Exterior Dimension: 720L×810W×1650H mm
Products Description
Supermarket Logistic Container
Manufacturing Excellence
Expertise Supplier
Warehouse Solutions
Reliability Partner
Benefits
Nestable: More efficient transportation
Zinc/hot dip galvanized/powder coating(customized)
Fully collapsible to save space
Warehouse, logistic, recycling, etc.
HM-RC007
Model No.
300 kg
Loading Capacity
720×810×1650 mm
Exterior dimension
450 sets
Loaded in 1X40'HQ
Accelerate large-scale replenishment with our two-sided supermarket logistics container. Dual-side access can help reduce bottlenecks during replenishment. For hypermarkets and high-volume distribution centres, repeated manual handling can add significantly to operating costs. This two-sided container is designed to reduce unnecessary transfers by supporting a continuous "dock-to-shelf" workflow.
Made from Q235 mild steel with Φ20 x 2 mm uprights, the unit has a stated load capacity of 300 kg. The open-frame geometry allows staff to work from both sides, which can be useful in narrow backrooms where turning the container is difficult. The supplied surface specification refers to an electrolytic zinc finish, a 120-hour salt-spray result under reference FS2023070301-1E, and an Ra 7 value. With a stated folded thickness of 225 mm, the units may help recover backroom space when not in use.
Advantages
Mass-scale nesting capability: The square-base geometry allows empty units to be nested tightly together, which may reduce the storage footprint in distribution hubs and store backrooms.
Ergonomic low-noise castors: The unit is equipped with 125 mm PU or nylon wheels. Rolling effort, noise, and floor protection depend on the wheel material, individual wheel rating, load distribution, floor condition, brakes, and route.
Burr-free safety finish
Every steel section is mechanically ground before finishing to remove burrs and smooth the surface.
Application
In a high-intensity hypermarket replenishment cycle, the supermarket logistics container serves as the main unit for goods movement. At the distribution centre, daily goods are picked and loaded directly into the two-sided units. Once the truck arrives at the store, the logistics coordinator manages offloading, and the units are wheeled from the vehicle to the backroom. Because the goods remain inside the container during temporary holding, the workflow does not require the same load to be repeatedly broken down and rebuilt on another handling unit. Store staff can then move the supermarket logistic container to the aisles during shelf-stocking windows. Dual-side access allows products to be reached from either side where the aisle layout permits safe operation. After use, the units can be folded if the selected configuration supports that operation and nested in the backroom for the next delivery cycle.
Hot Tags: supermarket logistic container, China, suppliers, manufacturers, factory, customized, buy, price, for sale, in stock, free sample, made in China
Product Specification
|
Model No. |
HM-RC007 |
|
Exterior Dim.(mm) |
720x810x1650 mm |
|
Load capacity (kg) |
300kg |
|
Number of sides |
2 sides |
|
Tube Diameter(mm) |
Φ20x2 |
|
Wire Diameter(mm) |
Φ8&Φ 6 |
|
Loaded in 1x40'HQ |
450 sets |
Similar Product
We provide tailored options for different operating requirements. Customized supermarket logistic container ID nameplates can support asset tracking and route categorization in busy distribution centres. Wheel materials can be selected for different site conditions, including high-elasticity PU for polished floors and reinforced nylon for heavy-duty outdoor loading docks. Final selection should also take account of load, wheel rating, floor protection, noise, ramps, brakes, and route conditions. Additional options include shelves for fragile stock and powder-coated colours for departmental identification.
Dimensions, payload, wheel arrangement, base construction, and folding or nesting behaviour may differ between these models. Confirm each model's specification separately.
|
Model No. |
Exterior Dimension |
Tube Diameter |
Wire Diameter |
Loading Capacity |
Loaded in 1x40'HQ |
Number of sides |
|
LxWxH(mm) |
mm |
mm |
kg |
sets |
|
|
|
HM-RC008 |
734x854x1680 |
Φ19&25x2 |
Φ10&Φ 6 |
500 |
320 |
3 sides |
|
HM-RC009 |
734x854x1680 |
Φ19&25x2 |
Φ10&Φ 6 |
500 |
320 |
4 sides |
|
HM-RC010 |
734x854x1680 |
Φ19&25x2 |
Φ3 |
500 |
320 |
Security |
Video
Discover how a supermarket logistic container can be folded to save storage space when empty. Watch the video to see its practical design for product transport, handling, and special logistic requirements.
HM Group
——
Hold Goods, Move World
- Experienced manufacturer and exporter since 2003.
- Export Quantity: Around max 300 containers per month in 2023
- 10 production bases in 7 cities: Dalian, Qingdao, Xiamen, Nanjing, Hangzhou
- Offer custom-designed to suit your every need
- OEM, ODM support
Production Process
The production process of the supermarket logistic container starts with precision cutting and controlled fabrication of each steel component. High-speed cutting equipment ensures consistent dimensions for the frame parts, which is important for smooth folding and nesting performance during daily use. After welding, each unit goes through mechanical grinding to remove sharp edges and welding burrs. This finishing process improves handling safety and protects both operators and goods during repeated warehouse movement.
Quality Control
Each batch of the supermarket logistic container is inspected through structural and functional testing before shipment. Load tests are carried out to check the strength of the base frame and uprights under rated conditions. Welding joints, folding mechanisms, and castor mounting points are also inspected to ensure stable operation during repeated warehouse handling.
Packing and shipping
1.Plastic banding with wooden pallet
2.Stretch film wrapped
3.The wheels are individually packed in cartons.
Certificate
"Switching to delivery cages trolleys has been a turning point for our distribution efficiency. The smooth finish on the steel also means zero injuries for my picking team, which is a top priority for our center's safety culture." — Operations Manager, Regional Logistics Hub
What Customers Say
"These supermarket logistics totes have streamlined our store replenishment process and saved backroom space." — Logistics Coordinator, Retail Distribution Center.
FAQ
Q: How does the two-sided design help replenishment?
A: It allows staff to access goods from both sides, reducing unnecessary movement in narrow store aisles.
Q: Is the finish suitable for humid environments?
A: Yes. Zinc plating helps protect the steel surface against corrosion during indoor warehouse.
Q: Can the wheels be replaced?
A: Yes. Replaceable castors allow damaged wheels to be changed without replacing the complete unit.
Q: How many empty units can be nested together?
A: Multiple empty units can be nested together to reduce storage space when not in use.
Previous: Folded Nesting Container
Send Inquiry
You Might Also Like
