Identification Method Of Storage Cage

1. If the material meets the standard, the storage cage is not qualified. The welding of the mesh and the base of the storage cage must be firmly welded. The junction of each wire of the mesh must be welded, and there must be no desoldering or missing welding. The base of the storage cage It must be fully welded to ensure strength.

2. The entire storage cage is basically high wire + channel steel. The material of the high wire determines the overall strength of the storage cage. Generally speaking, the manufacturer is required to provide a report on the material of the high wire. The material of the small steel plant is better. A large part of the load-bearing capacity of the storage cage lies on the channel steel, so the thickness of the channel steel determines whether the load-bearing capacity of the storage cage can meet the standard.

3. The galvanized thickness of the storage cage surface is not less than 8um, the surface is bright, no spots, and there is no scratching on the surface of the storage cage. These are all details of the production. Many storage cages are exported to Japan, Europe and the United States. Foreigners pay more attention to details.