Galvanized Wire Rack Decking

 

Euro Sizes
A.Loading capacity 300kg	B.Loading capacity 800kg		C.Loading capacity 1000kg
Mesh 50×150 mm	Mesh 50×100 mm		Mesh 50×100 mm
Dim (D×W) (mm)	Dim (D×W) (mm)		Dim (D×W) (mm)
600×880	1000×880	1050×1090	1000×1340
1000×880	1050×880	800×880	1050×1340
1050×880	1100×880	1200×880	800×1340
1100×880	1000×1090	1200×1090	1200×1340

American Sizes
Standard U-channel		Pallet Deck
Dim (D×W) (inch)		Dim (D×W) (inch)
24"×46"	42"×46"	24"×46"
30"×46"	42"×52"	36"×46"
36"×34"	42"×58"	36"×52"
36"×46"	48"×34"	42"×46"
36"×52"	48"×46"	42"×52"
36"×58"	48"×52"	44"×46"
42"×34"	48"×58"	48"×46"

 

Different rack layouts call for different wire mesh structures. Along with the standard U-channel type, galvanized wire rack decking can be made with inverted U-channels, flared channels, inside waterfall edges, flat flush edges, or up-turned rear edges. These options let a rack system match its beam shape, cleaning needs, and load-handling method without treating every storage area as the same.

 

 

Make your warehouse safer today! This video shows how to use wire decks for rack to keep your inventory secure. It is a durable solution that is very fast to install. Our goal is to simplify your work and protect your goods for years. Don't wait to improve your storage system. Reach out to our professional team right now for help!

 

 

 

 

 

 

Steel wire is drawn and cut to the required diameter, while support channels are formed to match the requested deck size. Automated wire mesh welding keeps the wire spacing and weld locations consistent from one production batch to the next. Forming equipment prepares the channel supports before they are joined with the mesh. This process control matters because a deck must sit correctly on the customer’s step beams. A consistent fit reduces adjustment work during installation and helps each rack level keep the intended support layout.

 

 

For galvanized wire rack decking, coating inspection is an important quality check. Inspectors measure the zinc layer on finished parts to confirm that the surface treatment is applied evenly. This check is especially relevant for decks used in cold rooms, humid loading areas, or locations with regular washdown. Uneven coating can leave exposed steel areas that may rust earlier than the rest of the deck. Size checks are also completed on deck depth, width, and U-channel position. These measurements help confirm that the deck will fit the specified step beam.

 

1. Prevent scattering in shipping - stretch film wrapped
2. Paper shells - edges are bundled up by paper shells

We are dedicated to showing that we are a dependable and exceptional partner for all of your requirements.

 

 

“We selected hot-dip galvanized units for the cold storage section and zinc plated units for the dry warehouse. The finish options made it easier to match each area’s working conditions.”

— Warehouse Maintenance Supervisor

 

Q: Can this deck support pallets that do not fully span the step beams?

A: Yes. The wire mesh provides a supporting surface between the beams. It is useful when pallet bases or stack racks are smaller than the available rack space.

 

Q: Which finish should be used in a cold storage area?

A: Hot-dip galvanized is the better option for cold storage and wet conditions. It provides stronger corrosion protection than zinc plated finishes used in dry indoor areas.

 

Q: Do U-channel supports fit every rack beam?

A: No. Standard U-channel supports are made for step beams. Confirm the beam step size, deck depth, and beam length before ordering.

 

Q: Does galvanized wire rack decking affect sprinkler coverage?

A: The wire mesh allows sprinkler water to pass through the deck level. Fire protection requirements should still be confirmed with the local authority and the rack layout plan.