Home / Knowledge / Details

What is the difference between Mild Steel and Stainless Steel?

Stainless steel:

Stainless acid-resistant steel is referred to as stainless steel. It is composed of two parts: stainless steel and acid-resistant steel. In short, steel that can resist atmospheric corrosion is called stainless steel, and steel that can resist chemical media corrosion is called acid-resistant steel. Generally speaking, steel with a content of Wcr greater than 12% has the characteristics of stainless steel. According to the microstructure after heat treatment, stainless steel can be divided into five categories: ferritic stainless steel, martensitic stainless steel, austenitic stainless steel, Austenitic-ferritic stainless steel, and precipitated carbide stainless steel text.
Stainless steel is usually divided into:

1. Ferritic stainless steel. Containing 12% to 30% chromium. Its corrosion resistance, toughness, and weldability increase with the increase of chromium content, and its resistance to chloride stress corrosion are better than other types of stainless steel.

2, austenitic stainless steel. The chromium content is more than 18%, and it also contains about 8% nickel and a small amount of molybdenum, titanium, nitrogen, and other elements. Good comprehensive performance, resistant to corrosion by various media.

3. Austenitic-ferritic duplex stainless steel. It has the advantages of austenitic and ferritic stainless steel and has superplasticity.

4. Martensitic stainless steel. High strength, but poor plasticity and weldability.

Carbon steel:

The main mechanical properties depend on the carbon content in the steel, and generally do not add a large amount of alloying elements to the steel, sometimes also called ordinary carbon steel or carbon steel.

1.Carbon steel is also called carbon steel, which refers to an iron-carbon alloy with a carbon content of less than 2% WC.

2.Carbon steel generally contains a small amount of silicon, manganese, sulfur, and phosphorus in addition to carbon.

3.Carbon steel can be divided into three categories: carbon structural steel, carbon tool steel, and free-cutting structural steel according to its purpose. Carbon structural steel is further divided into two types: architectural structural steel and machine-manufactured structural steel;

4.According to the smelting method, it can be divided into open-hearth steel, converter steel and electric furnace steel;

5. According to the deoxidation method, it can be divided into boiling steel (F), killed steel (Z), semi-killed steel (b) and special killed steel (TZ);

6.According to the carbon content, carbon steel can be divided into low carbon steel (WC ≤ 0.25%), medium carbon steel (WC0.25%-0.6%) and high carbon steel (WC>0.6%);
According to phosphorus and sulfur content, carbon steel can be divided into ordinary carbon steel (higher phosphorus and sulfur), high-quality carbon steel (lower phosphorus and sulfur), and high-quality high-quality steel (lower phosphorus and sulfur). Super high-quality steel.

In general carbon steel, the higher the carbon content, the greater the hardness and the higher the strength, but the lower the plasticity.

21

Q235 and Q195 are usually used in carbon steel, and They are not the same.

Q195 is a carbon structural steel. The yield strength is 195MPA. Lower strength than Q235. The price is cheaper. Used in construction, structure, motorcycle frame, etc. Generally not used for structural parts.

Q235 is also called ordinary carbon structural steel. Q represents the yield limit of this material, the latter 235 refers to the yield value of this material, and the yield strength of Q235 is about 235MPa. And with the increase of the thickness of the material, the yield value will decrease. Due to the moderate carbon content, the overall performance is better, the strength, plasticity, and welding properties are better matched, and the use is the most extensive. Often used in structural parts.

21-1

HM produce wire containers, roll cages, stillage, steel stacking racks, and other products as raw materials using Mild steel Q235, mainly because the material of Mild steel Q235 has plasticity, good toughness, resistance to welding cracks, and excellent welding performance. HM this Serve customers with the best quality and best price.

If you need a quote or concern about our metal products, drop us a line today. Tell us a little about yourself and your requirements, and one of our experts will contact you shortly to discuss the solutions that we can provide!

M: +86-150-40608276

E: sales@hmlrack.com

 

Send Inquiry